WSDOT SWR CV RSE - Connected Vehicle Roadside Equipment Functionality
Subsystem Description
'Connected Vehicle Roadside Equipment' (CV RSE) represents the Connected Vehicle roadside devices that are used to send messages to, and receive messages from, nearby vehicles using Dedicated Short Range Communications (DSRC) or other alternative wireless communications technologies. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.
Functional Object: RSE CACC Operations
'RSE CACC Operations' provides infrastructure support for formation and dissolution of strings of CACC–equipped vehicles and provides operating parameters to the strings of vehicles including string length, recommended speeds, and gaps.
Functional Object: RSE Communications Relay
'RSE Communications Relay' provides message relay services that extend effective communications range to improve communications systems performance and robustness. It also supports safety applications such as wrong way vehicle detection and other applications where roadside communication of warnings beyond DSRC range are needed to compensate for high speeds or line of site/RF interference challenges.
Functional Object: RSE Data Subscription Management
'RSE Data Subscription Management' manages data subscriptions for an RSE. It provides access to a catalog of available data, manages the necessary identification information and rules that govern the data subscriptions, supports communications with data providers to collect data per the subscription rules, and makes the data available to other RSE applications. It supports different mechanisms for collecting data including one–time query–response as well as publish–subscribe services.
Functional Object: RSE Device Management
'RSE Device Management' provides executive control and monitoring of the RSE hardware and installed software applications. It monitors the operational status of the hardware and other attached field devices and detects and reports fault conditions. A back office interface supports application installation, upgrade, and configuration as well as remote control of the operating mode and hardware configuration settings and initiation of remote diagnostics. A local interface is provided to field personnel for local monitoring and diagnostics, supporting field maintenance, repair, and replacement.
Functional Object: RSE Environmental Monitoring
'RSE Environmental Monitoring' collects environmental situation (probe) data from passing vehicles that are equipped with short range communications capability. The collected data includes current environmental conditions as measured by on–board sensors (e.g., ambient temperature and precipitation measures), current status of vehicle systems that can be used to infer environmental conditions (e.g., status of lights, wipers, ABS, and traction control systems), and emissions measures reported by the vehicle. The functional object collects the provided data, aggregates and filters the data based on provided configuration parameters, and sends the collected information back to a center for processing and distribution. This functional object may also process the collected data locally and issue short–term road weather advisories for the road segment using short range communications.
Functional Object: RSE Field Asset Locating
'RSE Field Asset Locating' scans RFID–equipped assets and records their location relative to the scanning device. In this case, the scanning device is a fixed piece of field equipment that monitors RFID tags within range. The asset locating system must know its location in 3D coordinates and calculate a range vector to the RFID tag. It can then provide the location and RFID ID to a back office service.
Functional Object: RSE Infrastructure Monitoring
'RSE Infrastructure Monitoring' collects environmental situation (probe) data from passing vehicles that are equipped with short range communications capability with particular focus on measures that may indicate infrastructure condition. The collected data includes current environmental conditions as measured by on–board sensors (e.g., ambient temperature and precipitation measures) and current status of vehicle systems that can be used to infer infrastructure condition (e.g., status of ABS, traction control systems, vertical acceleration measures) as reported by the vehicle. This functional object also supports short range communications with maintenance and construction vehicles, providing local control and monitoring of infrastructure sensors.
Functional Object: RSE Infrastructure Restriction Warning
'RSE Infrastructure Restriction Warning' uses short range communications to warn vehicles of infrastructure dimensional and weight restrictions.
Functional Object: RSE Intersection Management
'RSE Intersection Management' uses short range communications to support connected vehicle applications that manage signalized intersections. It communicates with approaching vehicles and ITS infrastructure (e.g., the traffic signal controller) to enhance traffic signal operations. Coordination with the ITS infrastructure also supports conflict monitoring to ensure the RSE output and traffic signal control output are consistent and degrade in a fail safe manner.
Functional Object: RSE Intersection Safety
'RSE Intersection Safety' uses short range communications to support connected vehicle applications that improve intersection safety. It communicates with approaching vehicles and ITS infrastructure to alert and warn drivers of potential stop sign, red light, and non–motorized user crossing conflicts or violations.
Functional Object: RSE Map Management
'RSE Map Management' provides the map functionality necessary to support map data updates to passing vehicles. It collects current map and geometry data and provides current map and geometry data to connected vehicles.
Functional Object: RSE Parking Management
'RSE Parking Management' monitors the basic safety messages generated by connected vehicles to detect vehicles parking and maintain and report spaces that are occupied by connected vehicles. It also uses short range communications to provide parking information to vehicles.
Functional Object: RSE Queue Warning
'RSE Queue Warning' provides V2I communications to support queue warning systems. It monitors connected vehicles to identify and monitor queues in real–time and provides information to vehicles about upcoming queues, including downstream queues that are reported by the Traffic Management Center.
Functional Object: RSE Restricted Lanes Application
The 'RSE Restricted Lanes Application' uses short range communications to monitor and manage dynamic and static restricted lanes. It collects vehicle profile information from vehicles entering the lanes and monitors vehicles within the lanes, providing aggregate data to the back office center. It provides lane restriction information and signage data to the vehicles and optionally identifies vehicles that violate the current lane restrictions. These functions are performed based on operating parameters provided by the back office managing center(s).
Functional Object: RSE Road Closure Management
'RSE Road Closure Management' communicates with qualified Connected Vehicles and barrier control systems to support local road closure management. It validates and requests implementation of road closure requests. During a closure, it can also support selective access to the closed area, only granting entry permission to allowed vehicles.
Functional Object: RSE Situation Monitoring
'RSE Situation Monitoring' is a general functional object that supports collection of traffic, environmental, and emissions data from passing vehicles. The data is collected, filtered, and forwarded based on parameters provided by the back office. Parameters are provided to passing vehicles that are equipped to collect and send situation data to the infrastructure in snapshots. In addition, this object collects current status information from local field devices including intersection status, sensor data, and signage data, providing complete, configurable monitoring of the situation for the local transportation system in the vicinity of the RSE.
Functional Object: RSE Speed Warning
'RSE Speed Warning' notifies connected vehicles that are approaching a reduced speed zone, providing: (1) the zone's current posted speed limit and (2) any roadway configuration changes associated with the reduced speed zone (e.g., lane closures, lane shifts) if applicable, and (3) associated warning information (i.e., the reason for the reduced speed warning). Configuration parameters that define the applicable speed limit(s), geographic location and extent of the reduced speed zone, and roadway configuration information are received from a center or provided through a local interface. The characteristics of individual vehicles may also be monitored and used to warn vehicles with specific limitations that reduce safe operating speeds, (e.g., rollover risk for tall vehicles). This functional object works in conjunction with the 'Roadway Speed Monitoring and Warning' functional object, which uses traditional ITS field equipment to warn non–equipped vehicles.
Functional Object: RSE Traffic Gap Assist
'RSE Traffic Gap Assist' provides advisory information to minor road drivers at a stop–sign controlled intersection to facilitate gap selection to proceed through the intersection. The application can be configured depending on the intersection geometry. It monitors Connected Vehicle traffic on the major road, augmenting infrastructure traffic detectors, to identify and measure traffic gaps. The intersection geometry, measured traffic gaps, and current gap assist sign displays are communicated to the connected vehicle that is navigating the intersection for use in driver advisories and warnings. The application may also collect vehicle size and performance profile from the connected vehicle to optimize the alerts and warnings to the capabilities of the vehicle and driver preferences.
Functional Object: RSE Traffic Monitoring
'RSE Traffic Monitoring' monitors the basic safety messages that are shared between connected vehicles and distills this data into traffic flow measures that can be used to manage the network in combination with or in lieu of traffic data collected by infrastructure–based sensors. As connected vehicle penetration rates increase, the measures provided by this application can expand beyond vehicle speeds that are directly reported by vehicles to include estimated volume, occupancy, and other measures. This object also supports incident detection by monitoring for changes in speed and vehicle control events that indicate a potential incident.
Functional Object: RSE Traveler Information Communications
'RSE Traveler Information Communications' includes field elements that distribute information to vehicles for in–vehicle display. The information may be provided by a center (e.g., variable information on traffic and road conditions in the vicinity of the field equipment) or it may be determined and output locally (e.g., static sign information and signal phase and timing information). This includes the interface to the center or field equipment that controls the information distribution and the short range communications equipment that provides information to passing vehicles.
Functional Object: RSE Work Zone Safety
'RSE Work Zone Safety' communicates with Connected Vehicles and Personal Information Devices carried or worn by the work crew to detect vehicle intrusions in work zones and warn crew workers and drivers of imminent encroachment. Crew movements are also monitored so that the crew can be warned of movement beyond the designated safe zone.
Functional Object: RSE Wrong Way Vehicle Warning
'RSE Wrong Way Vehicle Warning' detects and warns wrong way vehicles using V2I communications. It provides an interface with other field equipment that detects wrong way vehicles using infrastructure–based sensors.