Transit Vehicle V2V Safety Functional Area

Description

'Transit Vehicle V2V Safety' exchanges current vehicle location and motion information with other vehicles in the vicinity, uses that information to predict vehicle paths, and notifies the driver when the potential for an impending collision is detected. Information from on–board sensors (e.g., radars and image processing) are used to augment the V2V communications, if available. In addition to notifying the driver, control information can also be provided to support automated control functions that can avoid the collision. This object is similar to the 'Vehicle Basic V2V Safety', but it accounts for crash scenarios that are unique to transit vehicles (e.g., Vehicle Turning Right in Front of Bus). It is also stop–aware since stop locations pose specific crash threats for transit vehicles. Finally, the detection and control algorithms, filters, and timing account for bus performance and risk profiles associated with remote vehicles that are unique to transit.

Included In

C–TRAN Transit Vehicles

Functional Requirements

IDRequirement
01The transit vehicle shall exchange current vehicle location and motion information with other vehicles in the vicinity
02The transit vehicle shall provide to other vehicles an indication of its intent to leave a transit stop.
03The transit vehicle shall provide a warning to the transit vehicle operator if a nearby vehicle is a collision threat as the transit vehicle prepares to leave a stop or station.
04The transit vehicle shall be able to identify if another vehicles is pulling in front of the it to make a right turn using location information received from other vehicles.
05The vehicle shall be able to broadcast transit vehicle behavioral information (pulling out, about to stop, etc. to other vehicles in the vicinity
06The vehicle shall be able to acquire transit vehicle trajectory information.